Fiber Optic Drone G657A2 0.25mm 0.27mm Uav /Fpv Optical Cable Gl Fiber Factory Optic Fiber for Drones

• Customization: Available
• Application: Outdoor & Indoor
• Type: Bare Optical Fiber
• Connection Structure: SC
• Material Shape: Round Wire
• Core: Single Core
• Certification: RoHS, CE, ISO9001
• Brand: OEM
• Fiber Type: G657A2
• Use: Telecom
• Network: Bluetooth, Wired LAN, IP, 4G, 3G
• Color: Customer Requiremen
• MOQ: 1 Reel
• Transport Package: 35X35X2 Cm
• Trademark: GL FIBER or OEM
• Origin: China
• Package Size: 30.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 30.000kg

Product Description

Product Introduction

G.652/G.652.D Low Water Peak Single-mode Fiber

GL FIBER® provides the whole series of SMF products that meet and even excel the requirements of standards on performance indicators. Due to the high stability, these products effectively meet the demand for high speed, large capacity, long distance and small bending radius necessary for signal transmission in different applications.

Description:

GL FIBER® Plus bending insensitive single-mode fibre combines two attractive features: excellent low macro-bending sensitivity and low water-peak level. It is comprehensively optimized for use in O-E-S-C-L band (1260 -1625 nm). The GL FIBER® Plus's bending insensitive feature not only guarantees L-band applications but also allows for easy installation without excessive care when storing the fibre especially for FTTH networks application. Bending radii in fibre guidance ports can be reduced as well as minimum bend radii in wall and corner mountings.

Application:

• All types of fibre cables with different structures
• High performance optical network operating in O-E-S-C-L band
• High speed optical routes for Fibre-to-the-Home networks
• Cables with extreme low bending requirements
• Small-sized fibre cable and optical component

Feature Characteristics:

1. Extremely high bending loss resistance in the 7.5 to 15 mm bending radius range
2. Full compatibility with all G.652 fibres for any applications
3. Low attenuation satisfying the operation demand in O-E-S-C-L band
4. Low PMD satisfying high bit-rate and long distance transmission requirements
5. Low bending loss for highly demanding cable designs including ribbons

Standard:

GL FIBER® Plus bending insensitive single mode fibre meets or exceeds the ITU-T Recommendation G.652.D/G.657.A1/G.657.A2/G.657.B2 including the IEC 60793-2-50 type B1.3/B6.a1/B6.a2/B6.b2 Optical Fibre Specification.
6. Accurate geometrical parameters that insure low splicing loss and high splicing efficiency
7. High nd-value satisfying long operational lifetime in minimum bend radius

G657A2 Optical Fiber Technical Parameter
Characteristics		Conditions	Specied values	Units
Attenuation		1310nm	≤0.35	[dB/km]
		1383nm(after H2-aging)	≤0.35	[dB/km]
		1460nm	≤0.25	[dB/km]
		1490nm	≤0.23	[dB/km]
		1550nm	≤0.21	[dB/km]
		1625nm	≤0.23	[dB/km]
Attenuation vs. Wavelength Max. α dierence		1285-1330nm, in reference to 1310nm	≤0.03	[dB/km]
		1525-1575nm, in reference to 1550nm	≤0.02	[dB/km]
Zero Dispersion Wavelength(λ0)		--	1300-1324	[nm]
Zero Dispersion Slope(S0)		--	≤0.092	[ps/(nm2·km)]
PMD	Maximum Individual Fibre	--	≤0.1	[ps/√km]
	Link Design ValueM=20Q=0.01%)	--	≤0.06	[ps/√km]
	Typical Value	--	0.04	[ps/√km]
Cable Cuto Wavelength (λCC)		--	≤1260	[nm]
Mode Field DiameterMFD		1310nm	8.4-9.2	[μm]
		1550nm	9.3-10.3	[μm]
Eective Group Index of RefractionNe		1310nm	1.466	--
		1550nm	1.467	--
Point Discontinuities		1310nm	≤0.05	[dB]
		1550nm	≤0.05	[dB]
Geometrical Characteristics
Cladding Diameter		--	125.0±0.7	[μm]
Cladding Non-Circularity		--	≤0.7	[%]
Coating Diameter		--	235-245	[μm]
Coating-Cladding Concentricity Error		--	≤12.0	[μm]
Coating Non-Circularity		--	≤6.0	[%]
Core-Cladding Concentricity Error		--	≤0.5	[μm]
Curl(radius)		--	≥4	[m]
Delivery Length		--	Up to 50.4	[km/reel]
Environmental Characteristics		1310nm, 1550nm & 1625nm
Temperature Dependence Induced Attenuation		-60℃ to +85℃	≤0.05	[dB/km]
Temperature-Humidity Cycling Induced Attenuation		-10°C to +85°C, 98% RH	≤0.05	[dB/km]
Watersoak Dependence Induced Attenuation		23°C, for 30 days	≤0.05	[dB/km]
Damp Heat Dependence Induced Attenuation		85°C and 85% RH, for 30 days	≤0.05	[dB/km]
Dry Heat Aging		85℃, for 30 days	≤0.05	[dB/km]
Mechanical Specication
Proof Test		--	≥9.0	[N]
		--	≥1.0	[%]
		--	≥100	[kpsi]
Macro-bend Induced Attenuation	10 Turns Around a Mandrel of 15 mm Radius	1550nm	≤0.03	[dB]
	10 Turns Around a Mandrel of 15 mm Radius	1625nm	≤0.1	[dB]
	1 Turn Around a Mandrel of 10 mm Radius	1550nm	≤0.1	[dB]
	1 Turn Around a Mandrel of 10 mm Radius	1625nm	≤0.2	[dB]
	1 Turn Around a Mandrel of 7.5 mm Radius	1550nm	≤0.5	[dB]
	1 Turn Around a Mandrel of 7.5 mm Radius	1625nm	≤1.0	[dB]
Coating Strip Force		typical average force	1.5	[N]
		peak force	1.3-8.9	[N]
Dynamic Fatigue Parameter(nd)		--	≥20	--

Main Product

Company Profile

Hunan GL Technology Co., Ltd was founded in 2004 and have more than 21 years experiencedleading manufacturer of fiber optic cables & accessories in China which is located in Changsha,Hunan, the hometown of the great Chairman Mao. Over the past 21 years, our cables have estab-lished an extensive sales network around the world.

There're over 550 employees in GL, 70% belongs to technical and research department, 8 ofthem are Doctors, 30 of them are of master degree and over 200 staff are with Bachelor degreeAll the staff are well educated with rich practise experience and professional knowledge in fiberoptic cable business field, also with strong creativity and team spirit.

GL Fiber passed the the certification of lS0 9001:2015 Quality Systems in 2015. With perfectguality control system, Talented technical team, Advanced equipment, And our reliable quality.Our products gain reputed fame in domestic market and overseas market. GL has become themost reliable partner in the fiber optic cable industry.

Certifications

Production Line

Exhibition

FAQ

Q1 :How much does a fber cable cost?

A:Typically, the price per fiber optic cable ranges from $30 to $1000, depending on the type and quanti.ty of fbers:G657A1/G657A2/G652D/0M2/0M3/0M4/0M5, Jacket material PVc/LSZH/PE, Drum length,and Structural design and other factors affect the pricing offiber cables.

Q2.What is your terms of packing?

A: Generally, we pack our goods in drum with pallet for export.2KM/3KM/4KM/5KM of one drum or as peryourreauirements.

Q3.What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'l show you the photos of the products and packag-es before you pay the balance.

Q4. How about your delivery time?

A: Generally, it will take 5 to 7days after receiving your initial. The specifc delivery time depends on theitems and the quantity of your order.

Q5. Can you provide OEM or ODM?
A: Yes.

Q6. What is your sample policy?
A: We provide FREE sample if we have them in stock.