Corning Yofc Fiberhome Brand Optic Fiber 25.2km/Roll Bare Fiber Spool G652D Fiber Orange Colored Optical Bare Fiber for Kabel Batch Production

Product Description

Product Introduction

G.657.A2 Plus Bending Insensitive Single-mode Fibre

GL FIBER® provides the whole series of SMF products that meet and even excel the requirements of standards on performance indicators. Due to the high stability, these products effectively meet the demand for high speed, large capacity, long distance and small bending radius necessary for signal transmission in different applications.

Description:

GL FIBER® low water peak dispersion unshifted Single-mode fibre is designed specially for optical transmission systems operating over the entire wavelength window from 1260 nm to 1625 nm. By suppressing the water peak that occurs near 1383 nm in conventional single mode fibre due to hydroxyl (OH-) ions absorption, GL FIBER® fibre is able to open E-band (1360-1460nm) for operation, and consequently provides 100 nm more usable wavelengths.

Applications:

Thanks to its broad usable optical spectrum and outstanding optical performance, GL FIBER® fibre is the optimum choice that supports various applications such as Ethernet, Internet Protocol (IP), Asychronous Transfer Mode (ATM), Synchronous Optical Network (SONET) and Wavelength Division Multiplexing (WDM). GL FIBER® fibre provides more bandwidth for backbone, metropolitan area and access networks.

Feature Characteristics:

1. Designed for operation over the full optical spectrum from 1260-1625 nm, which provides 50% more usable wavelengths and hence the transmission capacity is increased
2. Outstanding optical performance supporting high-speed transmission technologies such as DWDM and CWDM
3. Being compatible with existing 1310 nm equipment
4. Good protection and excellent strip force stability
5. Accurate geometrical parameters that insure low splicing loss and high splicing efficiency

Standards:

GL FIBER® fibre complies with or exceeds the ITU-T Recommendation G.652.D and the IEC 60793-2-50 typeB1.3 Optical Fibre Specification. GL FIBER® tightens many parameters of fibre products so as to offer more conveniences to customers.
GL FIBER® fibre complies with or exceeds the ITU-T Recommendation G.652.D and the IEC 60793-2-50 typeB1.3 Optical Fibre Specification. GL FIBER® tightens many parameters of fibre products so as to offer more conveniences to customers.

Technical Parameter:
Characteristics		Conditions	Specied values	Units
Attenuation		1310nm	≤0.34	[dB/km]
		1383nm(after H2-aging)	≤0.34	[dB/km]
		1550nm	≤0.20	[dB/km]
		1625nm	≤0.24	[dB/km]
Attenuation vs. Wavelength Max. α dierence		1285-1330nm, in reference to 1310nm	≤0.03	[dB/km]
		1525-1575nm, in reference to 1550nm	≤0.02	[dB/km]
Dispersion Coecient		1285-1340nm	-3.5 to 3.5	[ps/(nm·km)]
		1550nm	≤18	[ps/(nm·km)]
		1625nm	≤22	[ps/(nm·km)]
Zero Dispersion Wavelength(λ0)		--	1300-1324	[nm]
Zero Dispersion Slope(S0)		--	≤0.092	[ps/(nm2·km)]
Typical Value		--	0.086	[ps/(nm2·km]
PMD	Maximum Individual Fibre	--	≤0.1	[ps/√km]
	Link Design ValueM=20Q=0.01%)	--	≤0.06	[ps/√km]
	Typical Value	--	0.04	[ps/√km]
Cable Cuto Wavelength (λCC)		--	≤1260	[nm]
Mode Field DiameterMFD		1310nm	8.7-9.5	[μm]
		1550nm	9.8-10.8	[μm]
Eective Group Index of RefractionNe		1310nm	1.466	--
		1550nm	1.467	--
Point Discontinuities		1310nm	≤0.05	[dB]
		1550nm	≤0.05	[dB]
Geometrical Characteristics
Cladding Diameter		--	125.0±0.7	[μm]
Cladding Non-Circularity		--	≤1.0	[%]
Coating Diameter		--	235-250	[μm]
Coating-Cladding Concentricity Error		--	≤12.0	[μm]
Coating Non-Circularity		--	≤6.0	[%]
Core-Cladding Concentricity Error		--	≤0.6	[μm]
Curl(radius)		--	≥4	[m]
Delivery Length		--	Up to 50.4	[km/reel]
Environmental Characteristics		1310nm, 1550nm & 1625nm
Temperature Dependence Induced Attenuation		-60℃ to +85℃	≤0.05	[dB/km]
Temperature-Humidity Cycling Induced Attenuation		-10°C to +85°C, 98% RH	≤0.05	[dB/km]
Water Immersion Dependence Induced Attenuation		23°Cfor 30 days	≤0.05	[dB/km]
Damp Heat Dependence Induced Attenuation		85°C and 85% RHfor 30 days	≤0.05	[dB/km]
Dry Heat Aging		85℃, for 30 days	≤0.05	[dB/km]
Mechanical Specications
Proof Test		--	≥9.0	[N]
		--	≥1.0	[%]
		--	≥100	[kpsi]
Macro-bend Induced Attenuation	100 Turns Around a Mandrel of 30 mm Radius	1625nm	≤0.05	[dB]
	100 Turns Around a Mandrel of 25 mm Radius	1310nm and 1550nm	≤0.05	[dB]
	1 Turn Around a Mandrel of 16 mm Radius	1550nm	≤0.05	[dB]
Coating Strip Force		typical average force	1.5	[N]
		peak force	1.3-8.9	[N]
Dynamic Fatigue Parameter(nd)		--	≥20	--

Main Product

Company Profile

Hunan GL Technology Co., Ltd was founded in 2004 and have more than 21 years experiencedleading manufacturer of fiber optic cables & accessories in China which is located in Changsha,Hunan, the hometown of the great Chairman Mao. Over the past 21 years, our cables have estab-lished an extensive sales network around the world.

There're over 550 employees in GL, 70% belongs to technical and research department, 8 ofthem are Doctors, 30 of them are of master degree and over 200 staff are with Bachelor degreeAll the staff are well educated with rich practise experience and professional knowledge in fiberoptic cable business field, also with strong creativity and team spirit.

GL Fiber passed the the certification of lS0 9001:2015 Quality Systems in 2015. With perfectguality control system, Talented technical team, Advanced equipment, And our reliable quality.Our products gain reputed fame in domestic market and overseas market. GL has become themost reliable partner in the fiber optic cable industry.

Certifications

Production Line

Exhibition

FAQ

Q1 :How much does a fber cable cost?

A:Typically, the price per fiber optic cable ranges from $30 to $1000, depending on the type and quanti.ty of fbers:G657A1/G657A2/G652D/0M2/0M3/0M4/0M5, Jacket material PVc/LSZH/PE, Drum length,and Structural design and other factors affect the pricing offiber cables.

Q2.What is your terms of packing?

A: Generally, we pack our goods in drum with pallet for export.2KM/3KM/4KM/5KM of one drum or as peryourreauirements.

Q3.What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'l show you the photos of the products and packag-es before you pay the balance.

Q4. How about your delivery time?

A: Generally, it will take 5 to 7days after receiving your initial. The specifc delivery time depends on theitems and the quantity of your order.

Q5. Can you provide OEM or ODM?
A: Yes.

Q6. What is your sample policy?
A: We provide FREE sample if we have them in stock.